Antec C7 ARGB – Constellation Series Case

Antec C7 ARGB – Constellation Series Case

Features:

SCI-FI DESIGN WITH PANORAMIC 270° VIEW

• Tempered glasses adopt Seamless paneling design with unique 45* beveling technique
• Lower Chamber features triangle-pattern vents to create the combination of futuristic tech and classic art.

VERTICAL COOLING

Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow.

MULTI-DIRECTIONAL AIR INTAKE AND MASSIVE AIRFLOW

Fine mesh on the top and right panel, and a great number of vents on the front, left and bottom of lower chamber provide massive airflow.

RE-INSTALLED 3 X 120MM ARGB PWM REVERSE FANS & 1 X 140MM ARGB PWM FAN

2 X 360MM RADS

Supports simultaneous installation of 360mm radiators on the top and side.

Side Radiator Installation

Remove the small cover on the PSU shroud to install a side radiator. Overall thickness up to 70mm.
(*When installed a side radiator with more than 52mm thickness, GPU length is limited to 280mm.)

SUPPORT RTX 4090

No interference between side radiator with standard thickness (52mm) and RTX 4090.

ALL REUSABLE FULLY-OPEN PCI SLOT COVERS

Configured with 7 reusable PCI slot covers, which can be turned 90* to mount the GPU vertically (additional riser cable needed).

Support Back-Connect Motherboards

Plug in cables from behind to give front a cleaner look and a smoother airflow channel.

FLIP DOOR STORAGE

Right flip door supports up to 2 x 3.5″ HDD /2.5″ SSD and 2 x 2.5″ SSD. The tray in the case bottom accommodates another 3.5″ HDD/2.5″ SSD.

MULTIPLE HARD DRIVES

Supports multiple hard drives, with different compatibility depending on the form factor of installed motherboard, 3 x 3.5″ HDD or 5 x 2.5″ SSD at most.

CABLE MANAGEMENT

Provides 2 Velcro straps on the back of motherboard to avoid cable clutter, and 2 Velcro straps at the rear for easier management of peripheral cables.

FLIP CABLE COVER

With a cable management space of 32mm and a removable flip-door cable cover, allowing for unobstructed cable management.

SCREW-FREE PANELS WITH CLIP HANDLES

• The lower front and lower left feature detachable mesh panels secured by hooks and magnets, with clip handle positions.
• Front panel and both side panels are secured by studs and hooks, with clip handle positions at the rear.
• Top panel is secured by studs.

DUST FILTER

• Front: Magnetic filter
• Left: Magnetic filter
• Bottom: Full-size pull-out filter

I/O PANEL

• Power
• LED Control Button
• Type-C 10Gbps x 1
• Headphone/Mic Combo Jack
• USB 3.0 x2